SEAJET Ribcoat Biocide-free Hard-Coating
Seajet RIBCOAT is a two-step foul-release kit engineered specifically for Rigid Inflatable Boats that live afloat for extended periods.
Stock Code: SJ-610ME0061BV-SET
Are you a trade/business customer looking for prices?
Not a trade/business customer? Find Local Chandleries
Product Description
Keep your RIB light, fast and fouling-free all season. Seajet RIBCOAT couples an ultra-clear epoxy primer with our more eco-friendly RIBCOAT silicone finish, forming a sleek, low-drag skin on both hull and tubes that shrugs off growth and lets you relaunch in as little as eight hours. Perfect protection, zero biocides. Ready for wherever the water takes you.
Biocide-free Hard-Coating:
• Biocide-free Foul release coating for rib's
• Ensuring speed and fuel efficiency
• Transparent coating
Recommended for:
Effective antifouling protection for Rib's that stay immersed all season long in either salt or brackish waters.
Information about the product:
System components:
Seajet Rib Primer – a crystal-clear, two-component epoxy (mix ratio 60 : 40 by volume) that keys tenaciously to GRP and other rigid composites, sealing the surface and ensuring maximum adhesion for the finish coat. Touch-dry in 30 min and ready for over-coating after 8 h at 20 °C.
Seajet RIBCOAT – a one-pack, silicone-elastomer foul-release coating that provides a superslick, non-stick surface. Marine growth may settle lightly but rinses away with water movement or a quick sponge wash. Over-coat window 6–8 h; launch in 8 h at 20 °C.
Application sequence:
Hull – Degrease, abrade with P100–P120, remove dust. Apply one thin coat of 114 Primer by roller/brush; allow to cure (see table above) then apply two coats of Bioclean Eco.
Tubes – Clean thoroughly (detergent & fresh-water rinse) and allow to dry; apply two coats of Bioclean Eco directly—no primer required.
Launch after the full system has cured for 8 h at 20 °C (longer in cooler conditions).
Key features & benefits:
Biocide-free & environmentally responsible – meets the latest regulations while keeping waters cleaner.
Ultra-low drag surface – silicone skin reduces fuel consumption and helps your RIB plane faster.
Long-life protection – remains effective for multiple seasons; easy spot-repair extends service life.
Simple maintenance – growth wipes off with a sponge or low-pressure wash; no harsh scraping required.
Versatile pack sizes – convenient kits sized for tenders through offshore patrol RIBs.
Recoating guidelines:
Good condition – wash with fresh water, let dry, apply one refreshing coat of RIBCOAT.
Damaged areas – abrade hull patches with P100–P120, spot-prime with Rib Primer, then finish with RIBCOAT; for tube scuffs, apply a local touch-up plus a full finishing coat.
With Seajet RIBCOAT you gain the speed of silicone, the grip of epoxy and the peace of mind of a proven, more planet-friendly system. Tailor-made for serious RIB owners.